Follow the aqueduct of Nîmes in southern France for 50 km from the spring to the city, with a fall of only 12 m. Travel with the water down a slope too gentle to see, over the bridge that holds its surface, through the distribution tank and fountains, to the lime bands left on the walls.
SpringChannelGorge and bridgeDistribution tankFountainsInside the channelThe whole line
Around AD 50, water is led from the spring of Fontaine d’Eure near Uzès, in southern France, to the Roman city of Nîmes. There are no pumps. The only thing to work with is that the spring lies about 12 m above the city’s distribution tank. Water cannot climb even one rise, so the route has to keep going gently downhill the whole way. In a straight line the spring and the city are about 20 km apart. The real aqueduct wound around the hills for about 50 km.
Heights of the spring and the city: Benjelloun et al. (2019) Geochemical study of carbonate concretions from the aqueduct of Nîmes (spring 72 m, Nîmes 59 m, 50 km by gravity alone). The total fall of 12.27 m is the figure from Fabre, Fiches & Paillet (2000).
First use Draw it straight to run a direct line from the spring to the city, and check in the band at the bottom whether it can cross the hills. Then compare it with Follow the contours.
Why did the aqueduct take a route more than twice as long as the straight line?